Are you currently experiencing technical problems with your XBox 360? Would you like to know how you can easily and quickly fix the problems and be gaming again in under one hour? Imagine being able to fix your XBox 360 technical problems yourself and not having to send your XBox back to Microsoft and wasting time and money. The truth is, that a lot of the technical problems that you experience are not as complicated to fix as what you think. In fact quite the opposite really, Microsoft just don’t want you to know.

Most XBox 360 technical errors can be corrected by anyone if you know how. You don’t have to be a technology expert to know how, all you need is the right guidance. Whether you’re experiencing freezing, E74 error, graphic glitches, 2 red lights, 3 red lights or just that your console is overheating you can fix these problems yourself in the comfort of your own home. No more do you have to pay your standard fee of $140 plus shipping and handling to send your console back to Microsoft. If you know how to correct these problems you can save your money and spend the money that you would normally throw away on servicing your XBox 360 on games.

Knowing how to service your own XBox can also make you money. I know that might sound ridiculous however it is quite true. If you know the simple techniques you can easily buy broken XBox 360 console’s off eBay and repair them yourself and resell them for a nice profit.

With that aside, the most common technical problem that gamers encounter is known as the ‘Three Red Light Error’. It has been found that the failure rate for this problem is above a staggering fifty percent. Most people believe it to be a result of overheating however the main cause is due to an engineering flaw on behalf of Microsoft. The ‘Three Red Light Error’ is in fact an electrical malfunction which has been built into the XBox 360.

A common method but incorrect and somewhat dangerous method to fix this problem is to wrap a towel around your XBox for twenty minutes while it is on. The logic behind this is that your XBox 360 will overheat as there is no ventilation for the heat from your CPU to escape and therefore the solder remelts and temporarily fixes the electrical connection. However, what people don’t realise that at the same time, all other electrical connections are heating up within your XBox 360 and will eventually destroy your XBox for good. In saying this you should not use this quick fix method.

To learn how to simply and safely overcome this common Xbox 360 problem or any Xbox 360 technical problem yourself visit http://www.diyxbox360repairs.com.

If you are reading this you are no doubt experiencing a Red Light on Xbox 360 issue. Issue? That is stating it mildly… It is more like a major disaster to most serious gamers! You might even consider it the end of the world. I’ll bet you are even considering buying a new one.

A friend of mine did that… bought a new one then forgot about fixing the first one and guess what? Yep, the second one did the same thing… he was fragged by the feared RRoD!

There has to be a better solution and no… switching to a PS3 would be…well… just not right, after all, you love your Xbox 360 games!

Since getting a new one doesn’t really solve much and it will cost some hard earned money that maybe you don’t have at this time, I will tell you of the other two options open to you. I am also going to briefly explain the cause behind the blinking red light on Xbox 360 s.

If you have 4 red lights on the power ring you’re in luck. That means your Xbox 360 isn’t detecting an AV cable. Might be just unplugged or need to be cleaned. If that doesn’t work that borrow another or but a new one.

1 or 3 red lights on the power ring indicate various types of hardware failure. You may even see an error code on the screen. E64 is a DVD drive error; E67 is a hard drive error and so on. Fixing it may be as easy as reloading the disk or a good old reboot. However, if you are reading this I’ll wager you already tried that and it didn’t work. Your solution is going to be a little more involved but have no fear… it’s completely doable. See your two options below.

2 red lights means your Xbox is overheated. This can make your console not function for a period of time. Unplug, take a break, and let your brick cool down. It should work again when it is cooled. Make sure your console is on a hard surface (not carpet) so air can get underneath, and in a well ventilated area. The overheating of an Xbox is actually rooted in a couple of design flaws and if this problem persists you will have to take some additional action. Again, the two options below.

Your two options if your Red Light on Xbox 360 issue persists:

1. Return your Xbox 360 to the manufacture. The manufacture has recognized various design flaws and is willing to address them. They have extend warranties from one to three years. The warranty is only good if your console has not been opened or tampered, so if you have been a bad boy (or girl) and nosed around inside your brick your warranty is no longer valid. If everything is still sealed then call 1-800-4MY-XBOX and check and see if you are still covered. If you are it is free. If not they will still repair but it will cost you around $150 (ouch!). Remember, the manufacture reserves the right to fix your console or replace it with a refurbished or new one. Down time: 2-4 weeks (bummer).

2. Fix your Xbox 360 yourself. This might seem a bit frighting at first but it really isn’t. You might feel that fixing your Red Light on Xbox 360 issue is beyond your abilities. Well think again. If it is not under warranty and you don’t have $150 or the time to wait this option starts looking better and better. If you have a quality guide and know the problems, fixing your Red Light on Xbox 360 issue will be a snap.

The key is to get a good quality guide, one with not only written instruction but also Video. This type of instruction has helped 10s of 1000s to fix their Red Light on Xbox 360 issues in as little as an hour… for less than $30!

Like usual, good common sense is the key to success. By identifying the problem and weighing your options then taking some action, you can have your Xbox 360 up and running in no time. Maybe without spending a bundle! Once resolved you will never have to worry about any Red Light on Xbox 360 issues again.

Don’t get PWNED by the RRoD! Don’t let down time revert you to NOOB status. Recover your Game Face by getting an Xbox Ring of Death Fix. Get that Brick Fixed for good.

Robert has examined what fellow gamers are saying about the Best Xbox 360 Repair Guides available and has published his ratings on his review site. Discover how easy it will be to get your Xbox 360 Dominating again!

Is your Xbox freezing during games or are you receiving the dirty disc error screen on your television?  If so, the problem you are experiencing has to do with your DVD drive.  While you can always purchase a replacement drive, you can save loads of money repairing it.  So the question on everyone’s minds is how to repair Xbox 360 when experiencing this problem.

The number one rule to keep in mind is to not blow canned air into the drive without opening it.  You may have read somewhere else that this is the solution, but it will actually make matters worse.  All you will be doing is assuring that the dust will be redistributed evenly inside the drive. 

As you wonder how to repair Xbox 360, you will find there are actually a few basic steps that can solve your DVD drive problem.  The first step is to use a standard CD/DVD cleaner.  You can purchase this at many retail stores that sell Xbox 360 or at any video game store.  This cleaner looks like a normal CD but with two small brushes on them.  The benefit to this is that it is only going to clean the lens. 

Your second step for how to repair Xbox 360 is to use the information given to you to figure out what drive you are working with.  You need to figure out the manufacturer of your Xbox DVD drive and complete the tear down tutorials.  Some of the manufacturers you may be working with include Thomson, Phillips, Laser Installation, or Samsun.

Once you have determined the manufacturer and completed the tear down tutorials, your next step is to clean the lens and mirror manually.  This is where it is beneficial to have read and completed the tear down tutorials.

Next, you are going to adjust the potentiometer on the laser.  Lastly, replace the laser in the DVD drive with the replacement you laser you purchase from Samsung, Phillips or Thompson.  Although it may seem a bit extreme, it is actually a fairly easy process if you follow the steps closely.

When looking at how to repair Xbox 360 when there is a DVD drive problem, you will find that you can purchase an entire new drive for your system.  However, there are quality instructions on the internet that can help you repair the system on your own.  It is a simple process that can be done fairly quickly.

There are a lot of common problems that a lot of people tend to face with their Xbox 360. A lot of people want to repair these problems all by themselves but the problem is that they are unable to find a good repair guide.

You have an option to send it back to Microsoft to get it repaired for you, but it will cost you too much. But if your Xbox 360 is under warranty, and you are willing to pay the shipping charges of %140, then you can opt this choice. Keep in mind that you will have to wait for weeks and may be for months to get it back refurbished. Even if the Xbox is under warranty, you still have to pay for the return shipping charges which will at least cost you twenty five dollars. You have a great headache, thinking of how you should pack it safely and secure it for the long journey.

You find that the green light has just turned to red and you assume that now your good days of playing the Xbox games are over unless you find someone to repair the Xbox 360 console for you. In this situation, you must be looking for some quick fix for the Xbox console to get rid of that frustrating red light problem.

If you are just left with no option, the final option that you are left with is to disassemble the console yourself and fix it fast, at your own. It is nothing new that you are going to do. Since the Xbox 360 first came out, gamers have been doing this at their own.

So here is all what you need to know about the best repair guide to fix the problems that you might face with your console.

If you happen to own an Xbox 360 then it would be a huge advantage for you if you know how to repair the problems that you might face. As you must know that the repair charges by Microsoft for a single repair is about $140 a repair.  This cost is very high for some people and I am sure you will be happy if you receive half of this amount. The time it takes to get an Xbox repaired from Microsoft is also that most people don’t like.

Well my friends when I was able to fix the most of the problems with my Xbox for the first time, all of my friends were really impressed. It wasn’t before long that they started to pay me for repairing their consoles.  And now I have a small side business going, this provides me with the extra income I need to buy new and exciting Xbox games. The tools required for these small repairs are mostly present in the Xbox repair kit; you just have to start working with these tools.

It is common these days to have a damaged Xbox, we hear most people are best at breaking their Xbox, as it is unfortunate for them, it could turn out to be a lucky sign for you as you are the one who can actually repair an Xbox.

The main thing that I wanted you to know is that repairing your consoles will not only save you a lot of money but you can also earn money if you can get your hands on the damaged consoles of your friends.  There are all the major gains that you can reap if you know how to fix the broken or the damaged Xbox consoles.