If you are reading this you are no doubt experiencing a Red Light on Xbox 360 issue. Issue? That is stating it mildly… It is more like a major disaster to most serious gamers! You might even consider it the end of the world. I’ll bet you are even considering buying a new one.

A friend of mine did that… bought a new one then forgot about fixing the first one and guess what? Yep, the second one did the same thing… he was fragged by the feared RRoD!

There has to be a better solution and no… switching to a PS3 would be…well… just not right, after all, you love your Xbox 360 games!

Since getting a new one doesn’t really solve much and it will cost some hard earned money that maybe you don’t have at this time, I will tell you of the other two options open to you. I am also going to briefly explain the cause behind the blinking red light on Xbox 360 s.

If you have 4 red lights on the power ring you’re in luck. That means your Xbox 360 isn’t detecting an AV cable. Might be just unplugged or need to be cleaned. If that doesn’t work that borrow another or but a new one.

1 or 3 red lights on the power ring indicate various types of hardware failure. You may even see an error code on the screen. E64 is a DVD drive error; E67 is a hard drive error and so on. Fixing it may be as easy as reloading the disk or a good old reboot. However, if you are reading this I’ll wager you already tried that and it didn’t work. Your solution is going to be a little more involved but have no fear… it’s completely doable. See your two options below.

2 red lights means your Xbox is overheated. This can make your console not function for a period of time. Unplug, take a break, and let your brick cool down. It should work again when it is cooled. Make sure your console is on a hard surface (not carpet) so air can get underneath, and in a well ventilated area. The overheating of an Xbox is actually rooted in a couple of design flaws and if this problem persists you will have to take some additional action. Again, the two options below.

Your two options if your Red Light on Xbox 360 issue persists:

1. Return your Xbox 360 to the manufacture. The manufacture has recognized various design flaws and is willing to address them. They have extend warranties from one to three years. The warranty is only good if your console has not been opened or tampered, so if you have been a bad boy (or girl) and nosed around inside your brick your warranty is no longer valid. If everything is still sealed then call 1-800-4MY-XBOX and check and see if you are still covered. If you are it is free. If not they will still repair but it will cost you around $150 (ouch!). Remember, the manufacture reserves the right to fix your console or replace it with a refurbished or new one. Down time: 2-4 weeks (bummer).

2. Fix your Xbox 360 yourself. This might seem a bit frighting at first but it really isn’t. You might feel that fixing your Red Light on Xbox 360 issue is beyond your abilities. Well think again. If it is not under warranty and you don’t have $150 or the time to wait this option starts looking better and better. If you have a quality guide and know the problems, fixing your Red Light on Xbox 360 issue will be a snap.

The key is to get a good quality guide, one with not only written instruction but also Video. This type of instruction has helped 10s of 1000s to fix their Red Light on Xbox 360 issues in as little as an hour… for less than $30!

Like usual, good common sense is the key to success. By identifying the problem and weighing your options then taking some action, you can have your Xbox 360 up and running in no time. Maybe without spending a bundle! Once resolved you will never have to worry about any Red Light on Xbox 360 issues again.

Don’t get PWNED by the RRoD! Don’t let down time revert you to NOOB status. Recover your Game Face by getting an Xbox Ring of Death Fix. Get that Brick Fixed for good.

Robert has examined what fellow gamers are saying about the Best Xbox 360 Repair Guides available and has published his ratings on his review site. Discover how easy it will be to get your Xbox 360 Dominating again!

The Xbox360 has a number of error messages that appear whenever your console has something wrong with it. The problem is, most people have no clue what these errors mean! So what are these errors that I speak of? Usually the error codes start in E (presumably for Error) and then there is a short series of numbers after the E. There is a good bit of them, so maybe this list will help you determine what is wrong with your console, and get you on your way to fixing it.

E 79 Error: This is usually an error of the hard drive, if you have this error you should try contacting customer support.

E 76 Error: This is a code for an unknown error. I know that is not very helpful, but that is what it stands for. Usually there are other errors that may pop up in conjunction with this one, if you have this error then you should contact customer support.

E 74 Error: This error is usually a problem with the scalar chip or the AV cable because of over heating. If you have this error try unplugging everything and letting the console cool down for a while. If this doesn’t work then call customer service.

E 73 Error: This is an error involving the Ethernet port, the port may be broken or there may have been an incorrect installation before you bought the console.

E 72 Error: This is also an unknown error, and you should have a professional look at this.

E 71 Error: This is a general error, reboot the Xbox.

E 69 Error: This is a hard drive error, do the same thing you would do for the E 67 error.

E 68 Error: This is an overheating problem, usually caused by poor air circulation.

E 67 Error: Hard drive error, try taking out the removable drive and then putting it back in, make sure the console is off first.

E 66 Error: This is a DVD drive error that is probably related to the firmware. This usually happens when people try to mod their console.

E 65 Error: This is another DVD drive error, and it is usually because the drive is not closed all the way. Or it could be because the tray is broken somehow.

E 64: Error: This is another DVD drive error the results from a fault in the internal drive wiring of the Xbox360.

E 45 Error: This is a dashboard error, there are pretty easy ways to fix this.

This may not be all of the errors that the Xbox360 can have. One of the worst, if not the worst, error that is not on this list, is the “red light error”. This is when 3 lights flash by the power button, signifying a problem with the CPU or GPU of the console. Usually when this happens, your Xbox360 is rendered unusable, until it is dealt with. If you unsure how to deal with this problem, then you should download the 3 Red lights Fix and you’ll be playing again within an hour. You should also browse this site and read some of the free info if you are looking for another error that is not shown here.

There is nothing more troubling than watching a movie or playing a game and having to deal with the system freezing up.  Whether you are dealing with heat issues or other problems causing the system to freeze up, it is a nuisance to deal with.  Luckily, there is information for repair for Xbox 360 during these circumstances.

As you are probably well aware of, heat needs to be removed from your Xbox in order for it to function properly.  As soon as you begin to see the system freeze up or odd artifacts in the graphics, chances are it is time to clean out your console. 

There is the chance that game lockups can be caused by DVD issues.  But if you are experiencing problems only while playing games and in specific spots during the games, you are probably due for a clean-up.  There is repair for Xbox 360 heat issues so that you can enjoy your games and movies again without having to deal with game lockups. 

When opening the console you are going to remove the hard drive and the DVD drive while leaving the rest of the system intact.  You want to start by blasting out the heat-sinks with compressed air while working your way out.  If you have purchased a new can of air, use a little away from the system first to avoid spraying out the liquid propellant as you move through your Xbox.  You can cause serious damage to the board and electronics by spraying the subzero liquid.

It is important to note that the heat generators are circled in red and the cooling inlets and outlets are in blue.  From there, you want to continue spraying compressed air by cleaning the dust from the surface of the board.  Make sure you pay close attention to the air holes at the front and sides of the case as these holes can be serious problems leading to repair for Xbox 360 heat issues.

After cleaning the motherboard with compressed air your next step toward repair for Xbox 360 is to remove the backing from the heat-sink while placing it squarely on top of the chip.  Put firm pressure on the backing for at least two minutes.  The last step is to replace the standard power course for the fan with a higher voltage power source.  This should improve the fan speed eliminating the system from freezing up or having any game lockups.

This can be a bit complicating if you are not the most technical person in the world.  You may be better off paying a professional to clean the system.  However, just know that there are tips for repair for Xbox 360 out there to eliminate your game lockup problems.

Is your Xbox freezing during games or are you receiving the dirty disc error screen on your television?  If so, the problem you are experiencing has to do with your DVD drive.  While you can always purchase a replacement drive, you can save loads of money repairing it.  So the question on everyone’s minds is how to repair Xbox 360 when experiencing this problem.

The number one rule to keep in mind is to not blow canned air into the drive without opening it.  You may have read somewhere else that this is the solution, but it will actually make matters worse.  All you will be doing is assuring that the dust will be redistributed evenly inside the drive. 

As you wonder how to repair Xbox 360, you will find there are actually a few basic steps that can solve your DVD drive problem.  The first step is to use a standard CD/DVD cleaner.  You can purchase this at many retail stores that sell Xbox 360 or at any video game store.  This cleaner looks like a normal CD but with two small brushes on them.  The benefit to this is that it is only going to clean the lens. 

Your second step for how to repair Xbox 360 is to use the information given to you to figure out what drive you are working with.  You need to figure out the manufacturer of your Xbox DVD drive and complete the tear down tutorials.  Some of the manufacturers you may be working with include Thomson, Phillips, Laser Installation, or Samsun.

Once you have determined the manufacturer and completed the tear down tutorials, your next step is to clean the lens and mirror manually.  This is where it is beneficial to have read and completed the tear down tutorials.

Next, you are going to adjust the potentiometer on the laser.  Lastly, replace the laser in the DVD drive with the replacement you laser you purchase from Samsung, Phillips or Thompson.  Although it may seem a bit extreme, it is actually a fairly easy process if you follow the steps closely.

When looking at how to repair Xbox 360 when there is a DVD drive problem, you will find that you can purchase an entire new drive for your system.  However, there are quality instructions on the internet that can help you repair the system on your own.  It is a simple process that can be done fairly quickly.

You are enjoying a nice game of Halo and suddenly a screen begins to appear discolored or fuzzy.  Although you are hoping it is nothing more than the TV going fuzzy for a second, the game then freezes.  This is a common problem that every Xbox 360 gamer dreads.  However, there are a number of ways you can repair your Xbox 360 rather quickly.

What you need to understand is that there are several different reasons why you may be experiencing problems with your system.  While there is one problem in particular that many experience, there are numerous problems you may be dealing with.  To help you repair your Xbox 360, it is best that you understand the “E” errors better first.

An “E” error signifies when your Xbox 360 receives one red light in the bottom left hand corner.  Typically this is going to occur after your system has been re-booted.  After rebooting the system you will receive one red flashing light and an onscreen error of some sort.  These errors are signified by an “E” and two numbers.

If you are receiving an E64, E65 or E66 error, these are all directly related to your DVD drive.  This can be an issue with overheating, but it is important you look online for how you can repair your Xbox 360 when there are DVD drive errors.  You can try to repair it yourself quickly by simply rebooting the system. 

If you are receiving an E67, E68 or an E69 error, these are hard try problems.  You can try to unplug your hard drive and play without it or you can attempt to reformat it.  If you are going to attempt to reformat it, make sure you have instructions to follow from online.  A general hardware error is going to be signified by an E73 message.  This can be caused by problems with the Ethernet or networking port.  If you do have an Ethernet cable plugged in, try playing without it to see if it is an issue with the cable.

The most common problem you will deal with is an E74.  The most common reason for this error is because the AV cable is installed incorrectly.  You can repair your Xbox 360 and solve this problem by disconnecting it and then reconnecting it.  If this is not the problem it may be because of a faulty ANA chip or a general hardware error related to your system overheating. 

There are countless errors you and your system can experience while enjoying a movie or a thrilling Xbox game.  Before you can repair your Xbox 360, you need to determine what the exact problem is.  After identifying the problem, look online for solutions or try out some of the simple methods listed in this article.